The next step involves analyzing th

The next step involves analyzing the structural strength of the test gate structure, which includes all three initial models. This analysis will be conducted using the Finite Element Method (FEM) with the Ansys Workbench software, specifically using the Static Structure analysis type. The process consists of the following steps: 1. Material assignment, 2. Mesh, 3. Setting boundary conditions, and 4. Analyzing the results. The details of these steps will be presented in the following section.

ผลลัพธ์ (อังกฤษ) 2:

下一步包括分析测试闸门结构的结构强度，包括所有三个初始模型。该分析将使用有限元法（FEM）和Ansys Workbench软件进行，特别是使用静态结构分析类型。该过程包括以下步骤：1。材料分配，2。网眼布，3。设置边界条件，以及4。分析结果。这些步骤的细节将在下一节中介绍。

ผลลัพธ์ (อังกฤษ) 3:

The next step involves analyzing the structural strength of the test door structure, including all three initial models. The finite element method (FEM) and ANSYS workbench software will be used for this analysis, especially the static structure analysis type. The process consists of the following steps: 1. Material distribution, 2. Mace, three. Set the boundary conditions and 4. Analysis results. The details of these steps will be introduced in the next section.