How to use the electric kettle to save energy.Boiling water type heat electric appliance is used. For the hot water use, such as coffee, take a bath or wash containers boiler this kind is mostly plain is a plug. Dig wire to heat to the boiling water, as needed. How to save energy is.1. Add water moderation. Add water to fit for the requirements because if you put too much water will make waste a lot of time and energy by right reason.2. Unplug immediately when in use.- when the water boils, must unplug it immediately.- do not plug the fire without someone or forgotten. Which may not save energy. And also harmful to the fire.The kettle, one will be automated, referred to as the "electric kettle." This type of pot is equipment convenient boiling water hot. The virtual kettle hot pot in the same machine andWhile using electric current will flow through the coil and control the heat. The temperature of the water in the boiling point on the increase until after the control heat will cut out. But there is still a current flows through the coil, but not much. The flows through resistive and signal lamp warm in this period is the warm water.When the temperature of the water down to one point. Heater control to work the water to boil again. Electric kettle to work and so on. If still plugged in. Should pull the plug out when not to use hot water anymore. In order to save energy.Note: electric kettle 500 WATT Open 15 hours per day of electricity per month is paid about 6 baht / GA to boil water, electricity 1 300 watts. Open 15 hours per day, the electricity per month is paid about 16 baht.
การแปล กรุณารอสักครู่..