How to Use an electric kettle to save energy for hot water heating appliances categories that are most commonly used. To make hot water for various applications, such as coffee, take showers or wash the other. Kettle This type is most common. Is a plug-in Dig wire will heat until the water boils as needed. How to save energy is one. Water appropriations Add water to decent demand, because if too much water is lost time. And energy by the second. Unplug when not in use - when the water boils. Will need to unplug it immediately - Do not plug in the power by the people or not. This may not save energy And also the danger of fire is another kettle will automatically be referred to as "electric kettle" Pot of this kind is an electrical device that provides a convenient way to boil water is always hot. The virtual kettle and thermos on the same machine as the electric current flows through the coil. Heat and Control The temperature of the water in your next increase until boiling, then set the thermostat to cut the power off. But still, a current flows through the coil, but not much. By flowing through the resistor and the signal lamp warm. In this period it is hot water when the water temperature drops to a certain point. Set the thermostat to run the water to boil again. An electric kettle, work like this indefinitely. If it is plugged in Should pull the plug when not to use hot water anymore. To save energy Note: Kettle 500 watt open 15 hours per day of electricity per month is approximately 6 baht / 1300 watt electric kettle, open 15 hours a day. Electricity bill per month is approximately 16 baht.
การแปล กรุณารอสักครู่..
