How to use the electric kettle, power The power of water to boil as the cooling appliances used. In order for the water heating use, such as coffee, or use any other utensil wash, bathe the kettle in this most simple type is the plug. Dig the wire to heat, boiling water as needed. How to power it is. 1. put the water, proper Put the water, enough to fit your needs because if a lot of water will cause a waste of time and energy by not incident. 2. unplug immediately when quitting-When boiling water must be removed immediately, unplug dash.-Do not plug in the lights, without forgetting who people are or may not save energy and also dangerous to fire. Kettle one is automatically. Known as the "electric kettle", this type of bottle is a device which, in the summer, so water boiling, there is always a virtual kettle and kettle are on the same machine. While using the electricity flowing through the coil ngankrasae and heat control allows the water temperature in the boiling point increases until the stick is then heat control will cut off but there is still a current flowing through the coils, but not much. By flowing through a resistor and the warm lights bulbs. During this period, it is hot water. When the temperature of the water up to one point. Set the heat control, boiling water again. An electric kettle is working continuously. If the power is plugged in. It should pull the plug out when you don't want to use hot water longer to save energy. Note: 500 watt electric kettle is open 15 hours per day of electricity per month is approximately 6/1300 watt electric kettle is open 15 hours per day of electricity per month is about 16 baht.
การแปล กรุณารอสักครู่..