How to send a fax.In case you can't connect your phone to a printer.1. press the button mode, a fax header.2. place top channel ADF (by facing the side with the text).3. press the destination fax number. On the printer, if used with a PABX or organization (check out the call to cut the case number 9 before or not).4. press the B/W or Color button and the machine will start to scan the document and send the fax. When Complete to Send Fax messages or more complete. The case, connect the phone to a printer.1. pick up the handset, then press the destination fax number from a phone and press 1 on the printer to send press the B/W or Color buttons (on the printer), and then hang up the phone.After you press the button or the button face Color B&W printer is up the steps, respectively. As follows:1. Dialing2. Connecting 3. Sending (steps 1-3 to the destination number transmission). 4. Document Text 1 5. Complete 6. return to the page panel stand by Fax.Sending a fax is complete.2. press the destination fax number on a printer as well as not to connect your phone to a printer as the top topics.If fax transmission problems.Check the connection of the lines (telephone number must be plugged into the LINE/line channels from your phone is plugged into the channels, EXT.)If the destination line is busy. After dialing the destination will sequentially 1. Redial Busy Line after Dialing 2.60s, then the machine will automatically perform a send or want to cancel, press the Stop/Clear button.If plugged in wrong. After pressing the number will sequentially 1. No dial Tone Dialing 2. redail after 60s. If pressing the berries are wrong.Press Stop/Cancel button to Restore the window up in the setting mode, press 1, or press Backspace (under the auto Answer button) to erase the number. How do you have 2 ways to receive a fax.1. set the Auto Answer:To set the fax Auto answer button press automatically from the machine, there is a green light gets stuck.If the printer is connected to a home phone, and then set the Auto Answer when there is a incoming phone signal. If the handset is up, the message screen, press 2 to get the machine will receive the fax automatically or press the Color button to receive faxes or B&W.If the phone is not connected. When there is an incoming phone call signals. The machine will beep sound then the machine will receive the information and print it. 2. do not set the Auto Answer:Need to connect your phone to a printer, always. When there is an incoming fax signal, picked up the phone to get the text screen, press 2 to get B&W, and then press or button Color to receive the data. The machine will print the data sent.If not, connect the phone. In case the signal send fax comes in. The machine will have a sound signal, receiving by pressing B/W or Color buttons, if not press will not be able to receive a fax, and no data is stored on the local machine.
การแปล กรุณารอสักครู่..