The work of electrolyte taste Spinning shown in Figure 3, when a voltage is not high for the system. One solution is a combination of a half-spherical droplet shape at the tip of the needle. As a result of the metal surfactant (surface tension), but when a high voltage to an electric field, covering the tip of the needle. Metal ions are formed at the surface of the solution. Thus, the electrostatic repulsion (Electrostatic repulsion) in the direction opposite to the surface tension [4] Thus, if the electric field is large enough to cause the momentum over, surfactants. Will result in a half-spherical shape of the solution at the end of a needle elongated shape. Cone called "Taylor cone" (Taylor's cone), and when the electric field is more valuable to the system until the crisis is the one. Was the driving force to a slurry ejected beam (solution jet) aircraft later this solution extends to a diameter smaller than a nanometer already agreed on the media in a manner that does not weave (non-. woven nanofiber) instability of the curvature of the fibers described by the modified form in Figure 3 (b) in the trunk of a solution that extends away from the beginning of time, the solution was induced charge. skin solution With an external electric field caused by the voltage between the tip of the secondary material. Get a conductor The resulting beam of charged up. For that reason, this The force unbalanced The solution makes fuselage stretched
การแปล กรุณารอสักครู่..