How to use an electric kettle, power-saving. The bathroom is a type of heat appliances commonly used together. For water heating applications such as coffee, bathe or wash the container, the other a kettle, this kind of very simple plug-in is. Dig the wire to heat till boiling water as needed. How to use the power saving is. 1. put water, adequate Put water, fit with your needs because if too much water will cause the waste of time and energy by a note. 2. unplug immediately when inactive-When water is boiled must unplug immediately.-Do not plug the supply without people or forget which may not save energy and can be dangerous to fire. Another type of Kettle will be automated. This is called "electric kettle", this type of bottle is an electrical device that makes it easy to boil water, so there's always a virtual kettle and kettle are on the same machine. While using electrical flow task will flow through the coils and heat control unit makes the water temperature in the infected increases until the boiling point after that, the control unit shuts off heat but still there is flow through the coils, but not much. By flowing through the resistor and signal lamps are hot. During this period, so it is hot water. When the temperature of the water decreases, until at one point. Set heat control to work, the boiling water again. Electric hot water bottle will work. If it is plugged in. Should pull the power plug out when you don't want to use hot water longer so as to save energy. Note: 500-watt electric kettle, open 15 hours per day of electricity per month salary is around 6 baht/1,300 watt electric kettle, open 15 hours per day of electricity per month is approximately 16 baht.
การแปล กรุณารอสักครู่..
