Refer to Figure 1.7.1 Lay pallet on level ground.7.2 Lay a cardboard tray on the pallet/gaylord.7.3 Load the shipping boxes on the pallet/gaylord, see typical box arrangement onFigure 2.7.4 The box “UP/This Way Up” sign logo is only applicable for loose shipment, notapplicable for palletized boxes.7.5 Shrink wrap the loaded pallet/gaylord around the sides and over the top7.6 Put on the cardboard sleeve. If sleeve height is higher than the stackedboxes, cut or fold the sleeve to the same height.7.7 Put on the cardboard cover. Corner protectors to be used if so instructed.7.8 Strap the built pallet, with the strap going through the underside of thepallet/gaylord. Ensure strapping band configuration is 4 strapping. Seal strapwith security tape. Also seal the rim of the top and bottom covers to the sleevewith security tape (See Figure 3)7.9 Shrink wrap the whole pallet/gaylord around the sides and over the top of thepallet/gaylord.7.10 Apply AMD security tape on the straps and on the cover trays.
การแปล กรุณารอสักครู่..
