Tape Measure is a kind of measure are stored in the cartridge entirely. Making in bringing applications at any time. Tape used to measure the distance, or check the size of the workpiece material, etc. The head of a tape measure with a hook. Which is used to cling to the edge of the workpiece measurement. The pull tape off the cartridges to be used to measure or monitor the size of the material. Or work with ease The user should learn about the importance of tape cartridge meter metal stamping shaped cartridge. The roll call was some kind of a metal spring inside a submerged cartridge chips. Measure the fish at the end of a hook. And in front of a tape measure in inches, feet or metric units as directed. Or some kind of tape is placed one inch units. And Metric units, as the other side is so easy to use. Tape available in the market. A tape cartridge length from 1:00 to 5:00 meters in size, carpenters and builders, the most popular size cartridges include a packing line. Measuring 2.00 meters in length
using a tape measure.
Tape Measure for Measure. Check the size of the material or product. Practices are
as follows:
1. The width or length measurements need to be clear
2. The use of hook tape on the edge of the wood. Then try to measure it.
Orthogonal to the edge of the wood and matches the given position
3. Pull the tape measure taut. Use a pencil or awl to match the length or width.
Down on a piece of wood or a piece of work.
Maintenance Tape
Maintenance tape in the condition of working practices are as follows: -
1. Avoid using solid or sharp. Scrape down the measure, which allows authorities to
gauge the measure was not clearly erroneous
2. Roll the tape contained within the cartridge. Should handle labor not to roll tape.
Cartridge too soon May cause damage to the tape jamming
3. Pull the tape measure too hard hooks to the head while measuring. Information requested may twist or stick
out is why the unit of measurement error
4. placing heavy objects on the tape. The tape may cause damage to the
steel
rebar
or steel rebar for reinforced concrete and masonry work in general. The ability to add strength to the structure
of
the iron supplement is usually divided into two categories:
1. Round smooth SR24 has a tensile strength at yield of not less than 2400 ksc. (Kg /. cm) diameter sizes as RB6 (mean size Round Bar eRA. 6 mm.), RB9, RB12, RB15, RB19, RB25, because the surface looks smooth, round, the bond between steel. Concrete is not good, so we have to be bent so that it can load more effectively
2. rebar SD30, SD40, SD50 has a tensile strength at yield of not less than 3000, 4000, 5000 ksc. by. the order typically have diameters as DB10 (for the market in general is hard), DB12 (mean Deformed Bar size era. 12 mm.), DB16, DB20, DB25, DB28, DB32 surface of rebar will look to articulate so. Add to bond metal to concrete more.
The use of this kind of deformed SD30, SD40, SD50 and depending on the type of structure is important. The appearance of deformed good Chevron must have an equal and uniform throughout the line. No defect rust No cracking and cracking And different kinds of steel. The length is usually sold in the market is 10 m., But may be ordered like 12 m. Or more, it must be custom made.
Industrial Standards (M.a.k.)
• rebar reinforced concrete: Round (TIS. 20 to 2,543)
• rebar reinforced concrete: rebar (TIS. 24-2548)
steel wire tie - a black one. No. 18 is the diameter of 1.24 mm. tensile strength 3000 ksc withstand twisting at least 75 rounds
marker
pens or chemical marker pen with a built-in ink. The pen is made of materials that absorb ink like filaments extruded or flannel handle (made of plastic, aluminum or glass) are hollow on the inside of the packaging materials that absorb ink like flannel taken to a conductive ink gradually. Seep out of the pen This type of pen and a pen sealed to prevent ink dry when not in use.
การแปล กรุณารอสักครู่..