1. จับงานให้อยู่กึ่งกลางมากที่สุดเว

1. The most work is centered unless unavoidable
2. Paste the need to close the jaws to be
3. Do not use the work tightly enough was tutorial too
4.Stamping the Pens should be stressed specimen timber or metal support beams under the workpiece to prevent moving parts with a hammer while the hammer
5.Hit or leverage to cut large pieces of work overload may cause damage to the pen.

1. capture, most centered unless the inevitable
2. Place the parts that need to work near the mouth of the catch as much as possible
3. Catch some tight, don't use too much capacity chasing
4. Stamping parts should be stressing pen wood or metal block that serves under the Chin to prevent moving parts while the pegs with hammer
5. Hit or leverage to cut pieces that are too large are of different pens may be more damaged.

1. to work at the center, most unless it is inevitable
2. Place the need to work in close proximity to the mouth of the most up to
3. Hold tight, do not use a bit too much is tightly
4.The Pen should be used to affix the pieces repeated timber or metal pieces pieces for under to prevent movement while pieces with a hammer punch
5.The stroke or pry up to cut the pieces are too large pieces of it may be damaged, broken pen.