Connect POSITIVE (+) voltmeter lead

Connect POSITIVE (+) voltmeter lead to alternator terminal B (output terminal). Connect
NEGATIVE (–) lead to case ground on alternator.
2. Shake alternator wiring harness. Meter should indicate battery voltage and should not
vary. If proper reading is not obtained, check for loose or dirty connections or damaged
wiring.
58883

ผลลัพธ์ (อังกฤษ) 2:

Connect POSITIVE (+) voltmeter lead to alternator terminal B (output terminal). Connect
NEGATIVE (-) Lead to Case Ground on alternator.
2. Shake alternator wiring harness. Battery Voltage Meter should indicate and should Not.
Vary. If Proper Reading is Not obtained, Check for Loose or dirty connections or Damaged.
Wiring.
58883

ผลลัพธ์ (อังกฤษ) 3:

Connect POSITIVE () voltmeter lead to alternator terminal B (output terminal). Connect
NEGATIVE (-) lead to case ground On alternator.
2. Shake alternator wiring harness. Meter should indicate battery voltage and should not
vary. If proper Reading is not obtained check for, loose or dirty connections or wiring damaged
.
58883