Plant design.Readers do not forget. Of course at the plant, including the seeds into the garden. We have to say and then ice off a process that would be subject to prior to entry into the ground open. Flats should also be copious water several hours or days before leaving we are ready. There is a row of you make a straight, and the correct term is closed and lifted out a plant with a shovel or a fork, shred transplanting or cut them off from each other with knives, keeping the soil as much as possible with each ball of roots. In their place, but not so much when they have to dry out before you get to get down on my hands and knees and straddling a row action "has" left hand trowel or dibber or if the ground is soft, making the hole bigger enough to root and stem as well. The factory made and confirmed that by bearing down on the back of the legs, on either side. Continue to end of row. To ensure your feet stop working well behind you, and finish the job and go back over the row. Confirm additional individual in the factory by pressing down the ground on both sides of the stem with the ball of the foot. When all the rows with surface finish than steel rake, and you'll have a job done and finished.If the weather and dry soil exceptionally It may need to be more careful. When placing trees pine or of water in each hole (on the surface) prior to planting or puddling the roots a thick rich soil and water mixture. The large leaves should be cut in half. In the case of the plants, succulent, or too high, this should be done in any case--better than the previous two days out.
การแปล กรุณารอสักครู่..
