Tools for screwing and shortfalls will be as follows:1. the spanner is a tool to tighten the head screws or knots. There are a lot of wrench, depending on the characteristics of the work such as.1.1 the wrench mouth die. In a world where most tightening so empty and restrictions will easily slip nut catcher. Chances slip ring wrench sueng less. Starting from Gerber 6-321.2 request for use in horses, wrench tighten the metal pipes or joints that are not suitable for the screw, use phioklom because it makes nut is damaged.1.3 the wrench rings Use the tightening or loosening into a deep hole, but not quite the niche or. Starting from Gerber 6-321.4 prachaeplok used instead of tightening or loosening bolts or.1.5 the wrench move Use a screw bolt or fastening devices are characterized as a shaft head shape, fit a device to use for the log device, such as a nut.Maintenance1. do not use a wrench to hammer or beat instead of a hammer.2. cleaning after use.3. avoid using a wrench that is larger than the screw or nut.2. with a screwdriver as a tool used to tighten or spit basket, crab, each type of screwdriver to twist with similar characteristics. Is there a handle made of wood or plastic. Screwdriver part is a round or square steel. Screwdriver breakdown is as follows:2.1. a flat screwdriver, screwdriver, used for a surgical screw throughout.2.2. with a screwdriver, flat screwdriver, look like Ray, different end screwdriver will be using four screws with quartered lobes.2.3. the block screwdrivers looks like a screwdriver, flat screwdriver, ends the square are used for square head nut. Maintenance1. use a screwdriver to fit the work style and Groove of the screw nut.2. after use, wipe it clean and then put the Toolbox.
การแปล กรุณารอสักครู่..