เบอร์ 1 หน้าจอแสดงข้อมูลที่ได้รับข้

Data screen 1 number that gets information from lasik module b.Helpline 2 timer function from the module is configured as b lasik watch minutes seconds and starts when you press the button start and stop buttons stopped working.Start button 3 number for receiving information from the module to get lasik even b-and stop when we press the button pause the pause button has been pressed to get information from the module continues from the original by Alonso lasik hitting start here.4 shows the time reference from the computer, as well as select c module that fits taper lasik be connected and close button. Used to close the program.

No. 1 display data received from the ZigBee module
number 2 timer module receives data from ZigBee. It defines the time in minutes, seconds and starts when you press start and stop with the stop
number 3 button start for getting information from the ZigBee module. To pick up indefinitely And stop when we hit the pause button you press pause then. Can receive information from the ZigBee module from the start by hitting the
No. 4 shows the time-based computer. Including a serial port at the ZigBee module is connected, the close button to close the program.

the number 1 display information received information from the module ZigBee
number 2 work timer data จากโมดูล ZigBee by configure. Watch the minutes, seconds and start when hit start and stopped working with the stop
.The number 3 Start button for getting data from the module sigma B will pick up slowly and stop when we hit pause when hit pause. Can get information from the module ZigBee on from the original by pressing the start per
.The number 4 show time reference from the computer. Including the selection of Syria long enough ZigBee module is connected, and the close used for closing
.